After purchasing a Split air conditioning unit, the next most important step is the split air conditioner installation process. An air conditioner installed correctly will provide the right amount of cooling and also increase durability.
Important Guidelines For Split AC Installation
As a home or business owner, you should know a few key aspects of split air conditioning installation.
1. Place of Indoor Installation
Determine the exact location of the indoor unit. You have to install the air conditioner at a place from where it cools down completely and the AC indoor unit should be installed at a height of 7-8 feet from the ground for adequate cooling inside the room..
2. Wall Strength
The indoor unit of a split AC is quite heavy, so it should be installed on a wall that can easily bear the weight of the indoor unit of the split AC.
3. Proper spacing between wall and AC unit
It is recommended that the indoor unit of the split AC has at least 10 – 15 cm of open space around its top and sides for proper airflow.
4. Correct tilt angle of indoor unit
When installing the aluminum bracket on the wall, make sure it is tilted slightly so that the indoor unit of the split AC when installed is also tilted slightly to allow free flow of condensed water from the draining pipe.
5. Correct location and Proper placement of outdoor unit
It is also important to ensure that the outdoor unit is on a flat surface. The outdoor unit contains all the important parts of your air conditioner, including the compressor and condenser. The outdoor unit of a split air conditioner is ideal for open space,. Open space means there is nothing to block the flow of wind. This will ensure a lot of freedom for your compressor and condenser to perform well. Make sure the outdoor unit is not in direct sunlight. If a roof is not available, an outdoor space with a sturdy wall that can hold the load of the outdoor unit without restricting airflow is also good.
6. Distance between indoor and outdoor unit
The correct distance between indoor and outdoor units plays a very important role in cooling. The maximum allowable distance between indoor and outdoor units of a split AC can be around 15 meters.
If you are looking for a technician for Split AC Installation in Gurugram then visit our website. You can find verified technicians near you on our website.